Brug bij Zaltbommel (Pro-rail) (object state)

A condition of an object at a particular time, reflecting the object's ability to fulfil it's requirements.

Properties

Element type
:
Object state
Summary
:
Strain gauge measurements on cross beams and on notches of the longitudinal beams. Ripples for validation calculation model to derive inspection intervals. Cross bars for reassessment by third parties.
Performance indicator
:
Displacement, Other, strain measurements
"Other" is not in the list (Deformation, Displacement, Traffic information via WIM/BWIM, Dynamic response (acceleration/damping/frequencies), Material mechanical properties, Chemical properties, Electrical properties, Load bearing capacity, Spatial properties (concrete cover/duct voids), Other actions (wind/temperature/earthquake), ...) of allowed values for the "Performance indicator" property. "strain measurements" is not in the list (Deformation, Displacement, Traffic information via WIM/BWIM, Dynamic response (acceleration/damping/frequencies), Material mechanical properties, Chemical properties, Electrical properties, Load bearing capacity, Spatial properties (concrete cover/duct voids), Other actions (wind/temperature/earthquake), ...) of allowed values for the "Performance indicator" property.
Inspection method
:
Other, Strain gauges
"Strain gauges" is not in the list (Satellite technologies, Aerial and UAV technologies, Terrestrial dedicated inspection platforms and MMS, NDT active or passive testing technologies, IoT and sensor systems, Physical methods, Chemical methods, Visual inspection, Other) of allowed values for the "Inspection method" property.



The inspection method used in this case study to determine the object state was "Other,Strain gauges". This can include any of the following surveying technologies. Click one of the links below for more information:


Other

  • (No corresponding surveying technology was found.)
    Strain gauges
  • (No corresponding surveying technology was found.)